Physicothermal and Topography Analysis of Polyurethane Modified Bitumen with Rediset for WMA Application
DOI:
https://doi.org/10.5614/j.eng.technol.sci.2023.55.1.4Keywords:
polyurethane, Rediset, thermal behavior, topography, warm mix asphaltAbstract
The effects of modifying a 60/70 penetration grade bitumen with 3 wt% polyurethane (PU) and a Warm Mix Asphalt (WMA) additive, namely Rediset, were explored in this research. Penetration, softening point, viscosity, and ductility tests were employed for consistency testing, while the differential scanning calorimetry was used for thermal characterization. The topography and surface roughness of the modified bitumen were evaluated using atomic force microscopy. Adding PU and Rediset to the base bitumen (BB) stiffens the BB slightly, giving it a lower penetration and higher viscosity values, which improves the rutting resistance. The thermal transition of the glass temperature and melting temperature are similar to the BB. Furthermore, the addition of PU and Rediset to BB shows a clear bee structure topography in dry condition, indicating better dispersion, while in wet condition, the bee structure is mostly affected in the catana and para phase that reveals a reduced in the the wax content of the BB. The bitumen modified with PU and Rediset has a lower surface roughness than BB, making it less susceptible to moisture damage.
Downloads
References
Feng, Z., Cai, F., Yao, D. & Li, X., Aging Properties of Ultraviolet Absorber/SBS Modified Bitumen Based on FTIR Analysis, Construction Building Material, 273, 121713, 2021.
Al-Sabaeei, A.M., Mustofa, B.A., Sutanto, M.H., Sunarjono, S. & Bala, N., Aging and Rheological Properties of Latex and Crumb Rubber Modified Bitumen Using Dynamic Shear Rheometer, Journal of Engineering and Technological Sciences, 52, pp. 385-398, 2020.
Haryanto, I. & Takahashi, O., Crack Initiation Assessment of Wearing Course Asphalt Mixtures Using Aggregate Gradation Characteristic, Journal of Engineering and Technological Sciences, 39, pp. 28-42, 2007.
Gaudenzi, E., Canestrari, F., Lu, X. & Cardone, F., Performance Assessment of Asphalt Mixture Produced with A Bio-Based Binder, Materials (Basel), 14, pp. 1-13, 2021.
Yaro, N.S.A., Napiah, M., Sutanto, M.H., Usman, A., Mizwar, I.K. & Umar, A.M., Engineering Properties of Palm Oil Clinker Fine-Modified Asphaltic Concrete Mixtures, Journal of Engineering and Technological Sciences, 54, 220205, 2022.
Nurhayati, C., Susilawati, N., Susanto, T., Marthalia, W., Nugroho, A.K. & Pane, A.P., The Effect of Linear Low-Density Polyethylene and Palm Kernel Shell Ash Mixture on the Physical, Mechanical and Degradation Properties of Paving Blocks, Journal of Engineering and Technological Sciences, 54, 220307, 2022.
Alamawi, M.Y., Khairuddin, F.H., Yusoff, N.I., Badri, K. & Ceylan, H., Investigation of Engineering Properties of Bio-Based Binder Derived From Palm Oil as a Replacement for Bituminous Binder, Connecting Asia with Better Roads, 2nd IRF Asia Regional Congress & Exhibition, 2016.
Khairuddin, F.H., Alamawi, M.Y., Md Yusoff, N.I., Badri, Ceylan, K.H. & Mohd Tawil, S.N., Physicochemical and Thermal Analyses of Polyurethane Modified Bitumen Incorporated with Cecabase and Rediset: Optimization Using Response Surface Methodology, Fuel, 254, 115662, 2019.
Rubio, M.C., Martez, Baena, G.L. & Moreno, F., Warm Mix Asphalt: An Overview, Journal Cleaner Production, 24, pp. 76-84, 2012.
Zaumanis, M., Warm Mix Asphalt Investigation, Master Thesis, Riga Technical University, 2010.
Yao, H., You, Z., Li, L., Goh, S.W., Lee C. H., Yap, Y.K. & Shi, X., Rheological Properties and Chemical Analysis af Nanoclay and Carbon Microfiber Modified Asphalt with Fourier Transform Infrared Spectroscopy, Construction Building Material, 38, pp. 327-337, 2013.
Asmael, N.M. & Waheed, M.Q., Performance of Chemical WMA Mixtures ? A Review, International Journal Advance Scientific Research Engineering, 06(01), pp. 120-126, 2020.
Goh, S.W., Hasan, M.R.M. & You, Z., Performances Evaluation of Cecabase RT in Warm Mix Asphalt Technology, in Procedia - Social and Behavioral Sciences, pp. 2782-2790, 2013.
Hamzah, M.O., Gungat, L., Md Yusoff, N.I. & Valentin, J., Recycled Asphalt Pavement with Warm Mix Additive for Sustainable Road Construction, International Journal Civil, Environmental Structural Construction Architectural Engineering, 10(3), pp. 313-316, 2016.
Khairuddin, F.H., Mohd Yusoff, N.I., Badri, K.H. & Ceylan, H., Thermal, Chemical and Imaging Analysis of Polyurethane / Cecabase Modified Bitumen, Material Science Engineering, 512, 012032, 2019.
Awazhar, N.A., Khairuddin, F.H., Rahmad, S., Fadzil, S.M., Omar, H.A., Md. Yusoff, N.I. & Badri, K.H., Engineering and Leaching Properties of Asphalt Binders Modified with Polyurethane and Cecabase Additives for Warm-Mix Asphalt Application, Construction Building Material, 238, 117699, 2020.
Airey, G.D., Rheological Evaluation of Ethylene Vinyl Acetate Polymer Modified Bitumens, Construction Building Material, 16, pp. 473-487, 2002.
Yero, S. & Hainin, M., Evaluation of Bitumen Properties Modified with Additive, International Journal Recent Research and Applied Study, 13, pp. 93-97, 2012.
Vaitkus, A., ?ygas, D., Laurinavi?ius, A. & Perveneckas, Z., Analysis and Evaluation of Possibilities for the Use of Warm mix Asphalt in Lithuania, Baltic Journal Road and Bridge Engineering, 4(2), pp. 80-86, 2009.
Gill, P., Moghadam, T.T. & Ranjbar, B., Differential Scanning Calorimetry Techniques: Applications in Biology and Nanoscience, Journal of Biomolecular Techniques, 21(4), pp. 167-193, 2010.
Rosyidi, S.A.P., Idiajir, B., Akhir, N.M., Rahmad, S. & Lestari, N.P., Physical, Chemical and Thermal Properties of Palm Oil Boiler Ash / Rediset- sustainability Physical, Chemical and Thermal Properties of Palm Oil Boiler Ash / Rediset-Modified Asphalt Binder, Sustainability, 14, 3016, 2022.
Rahmad, S., Hussain, S., Atmaja, S. & Rosyidi, P., Assessment of Metal Leaching from Rediset-Polymer Modified Asphalt Binder on Groundwater and Soil Contamination Case Studies in Construction Materials Assessment of Metal Leaching from Rediset-Polymer Modified Asphalt Binder on Groundwater and Soil Contam, Case Study Construction Material, 16, e01108, 2022.
Lyne, L., Wallqvist, V. & Birgisson, B., Adhesive Surface Characteristics of Bitumen Binders Investigated by Atomic Force Microscopy, Fuel, 113, pp. 248-256, 2013.
Santos, S., Partl, M.N. & Poulikakos, L.D., Newly Observed Effects of Water on the Microstructures of Bitumen Surface, Construction Building Material, 71, pp. 618-627, 2014.
Yao, Z., Zhu, H., Gong, Yang, M. J., Xu, G. & Zhong, Y., Characterization of Asphalt Materials? Moisture Susceptibility using Multiple Methods, Construction Building Material, 155, pp. 286-295, 2017.
Wang, Z., Liu, Y., Gong, C., Yuan, Z., Shen, L., Chang, P., Liu, K., Xu, T., Jiang, J., Chen, Yu-C. & Liu, T., Liquid Crystal-Amplified Optofluidic Biosensor for Ultra-Highly Sensitive and Stable Protein Assay, PhotoniX, 2(1), pp. 1-16, 2021,
Liu, S., Zhou, S. & Peng, A., Analysis of Moisture Susceptibility of Foamed Warm Mix Asphalt Based on Cohesion, Adhesion, Bond Strength, and Morphology, Journal Cleaner Production, 277, 123334, 2020.
