Komposit Polimer Sebagai Material Tahan Balistik

Authors

  • Mardiyati Mardiyati Pusat Teknologi Pertahanan dan Keamanan, Institut Teknologi Bandung, Indonesia

Abstract

Penggunaaan material komposit polimer dalam bidang militer sangat luas. Review ini memberikan wawasan tentang material komposit polimer serta aplikasinya dalam bidang pertahanan, terutama untuk aplikasi di bidang balistik. Secara umum, keperluan militer yang membutuhkan material dengan ketahanan balistik yang baik dapat dibagi menjadi tiga kategori, yakni pakaian, helm, kendaraan dan penguat struktural. Pemanfaatan material komposit pada aplikasi militer terbukti dapat memberikan peforma yang lebih baik dibandingkan dengan material logam terutama dalam meningkatkan kemampuan mobilitas dari personil pertahanan.

Kata Kunci: balistik, komposit, polimer, militer, pertahanan

References

P.K.Mallick. Fiber-Reinforced Composites. CRC Press Taylor & Francis Group. 2008, hal 24- 40.

Ru-Min Wang, Shui-Rong Zheng and Ya-Ping Zheng. Polymer Matrix Composites and Technology. Woodhead Publishing Limited and Science Press Limited, 2011, hal 6-9.

Laible, R.C., Barron, E., Ballistic Materials and Penetration Mechanics. Elseveir Scientific Publishing Company, Amsterdam. 1980.

Roberts, J., Proceedings of Defense Components and Equipment Exhibition, Session 3. New Materials, London. 1985.

Dos Santos Alves, A.L., Nascimento, L.F.C., Suarez, J.C.M., Influence of weathering and gamma irradiation on the mechanical and ballistic behavior of UHMWPE composite armor. Polymer Test 24, 104e113. 2005.

Chabba, S., Es, M., Klinken, E.J., Jongedijk, M.J., Vanek, D., Gijsman, P., Waals, A.C.L.M.,. Accelerated aging study of ultra high molecular weight polyethylene yarn and unidirectional composites for ballistic applications. Journal of Materials Science 42,2891e2893. 2007.

Guru raja, M.N., Hari rao, A.N., Effect of an angle-ply orientation on textile properties of kevlar/glass hybrid composites. International Journal on Theoratical and Applied Research in Mechanical Engineering 2 (3), 1. ISSN:2319-3182. 2013.

Ray, B.C. Impact of environmental and experimental parameters on FRP composites. In: Eighteenth International Symposium on Processing and Fabrication of Advanced Materials (PFAM XVIII), pp. 12e14. 2009.

Ashok Bhatnagar. Lightweight Ballistic Composites Military and Law-Enforcement Application. Woodhead Publishing is an imprint of Elsevier.2016.

Paul V. Cavallaro. Soft Body Armor: An overview of Materials, Manufacturing, Testing, and Ballistic Impact Dynamics. NUWC-NPT Technical Report 12, 057 1 August 2011.

Ryan, J.M., Cooper, G.J., Haywood, I.R., Milner, S.M. Field surgery on a future conventional battlefield: strategy and wound management. Annals of the Royal College of Surgeons of England 73 (1), 13e20. 1991.

Lewis, E.A., Between Iraq and a hard plate: recent developments in UK military personal armour. In: Personal Armour Systems Symposium 2006. The Royal Armouries, Leeds, UK. 2006.

Ramasamy, A., Clasper, J.C., Stewart, M.P.M., Injuries from roadside improvised explosive devices. The Journal of Trauma Injury, Infection, and Critical Care 65 (4), 910e914.2008.

Breeze, J., Gibbons, A.J., Shieff, C., Banfield, G., Bryant, D.G., Midwinter, M.J., Combat-related craniofacial and cervical injuries: a 5-year review from the British military. The Journal of Trauma Injury, Infection, and Critical Care.2011.

White, M., 2013. Coalition Military Fatalities. Retrieved 1st October, from: http://icasualties. org/OEF/Fatalities.aspx.

Linda, S. Schadler. Polymer-based and polymer-filled nanocomposites. In Nanocomposite science and technology, edited by P. M. Ajayan; L. S. Schadler P. V. Braun. WILEY-VCH Verlag GmbH Co. KGaA, Weinheim. pp. 77-153. 2003.

Lee, Y.S. & Wagner, N.J. Dynamic properties of shear thickening colloidal suspensions. Rheologica Acta, 42(3), 199-208.2003.

Lee, Y.S.; Wetzel, E.D.; Egres Jr., R.G. & Wagner,N.J.Advanced body armor utilizing shear thickening fluids. In Proceedings of the 23rd Army Science Conference Orlando, FL, 2-5 December 2002. 2002.

Lee, Y.S.; Wetzel, E.D. & Wagner, N.J. The Ballistic impact characteristics of KevlarWoven fabrics impregnated with a colloidal shear thickening fluid. J. Mater. Sci.,38(13), 2825-833.2003.

Hurlich, A., Metallurgical and ballistic investigations of fifty captured German helmets. Wartertown Arsenal Laboratory. 1944.

Beyer, J.C., Enos, W.F., Holmes, R.H., 1962. Personnel protective armor. In: Beyer, J.C. (Ed.), Wound Ballistics. Office of the Surgeon General, Department of the Army, Washington D.C.

Houff, C.W., Delaney, J.P., Historical documentations of the infantry helmet research ad development. USA, Human Engineering Laboratory, Aberdeen Proving Ground, MD. 1973

Carey, M.E.,. Ballistic helmets and aspects of their design. Neurosurgery 47, 678e689. 2000.

Rosenblatt, M., Analysis of fragmentation protection for two commercial helmets. In: Personal Armour Systems Symposium 2010, Fairmont Le Chateau Frontenac, Quebec. City, Canada. 2010.

Chen, X., Advanced fibrous composite materials for ballistic protection. Woodhead Publishing Series in Composites Science and Engineering.2016.

Downloads

Published

2018-04-12

Issue

Vol. 1 No. 1 (2018)

Section

Articles

License

License and Copyright Agreement

In submitting the manuscript to the journal, the authors certify that:

  • They are authorized by their co-authors to enter into these arrangements.
  • The work described has not been formally published before, except in the form of an abstract or as part of a published lecture, review, thesis, or overlay journal.
  • That it is not under consideration for publication elsewhere,
  • That its publication has been approved by all the author(s) and by the responsible authorities tacitly or explicitly of the institutes where the work has been carried out.
  • They secure the right to reproduce any material that has already been published or copyrighted elsewhere.
  • They agree to the following license and copyright agreement.