ANALISIS TERMOHIDROLIKA TERAS REAKTOR SUSUNAN HEKSAGONAL
Abstract
In this experiment, the study focusses on reactor core thermohydraulic aspects especially the distributions of fuel surface temperature, uid temperature and uid axial velocity. Simulation data were obtained in the middle, at the edge and at the comer sub-channels. In this experiment, modeling of hexagonal configuration of reactor core and reector was carried out. The power generations were assumed constant at 250 kwatt, 375 kwatt and 5 00'kwatt for each filel element. This model was prepared and analyzed using Fluent Version 4.25 package program available at the Thermodynamic Laboratory of IURC-ES. The result shows that this reactor core model gives low fuel surface and fluid temperatures.
References
AA. Supriyanto, "Analisis Termohidrolika Teras Reaktor Susunan Heksagonal" , Tugas Akhir Program Pasca Sarjana pada Fakultas Ilmu dan Rekayasa Nuklir, ITB, Bandung Januzui 1997.
A. Suwono, "Pendekatan Model Media Berpori Sub-buluh Dalam Analisis Termodinamika Berkas Bahan Bakar Reaktor Nuklif', PPTKR-BATAN, Serpong, 1994.
M.A. Waskito dkk, "Rencana Studi Karakteristik Termohidrolik Sub-buluh dalam Berkas Bahan Bakar Reaktor pada Untai Uji Nilo 1", PPTKR-BATAN, Serpong, 1994.
Anonim, "Computational Aided Design" , Fluent User's Guide, Version 4.2, Fluent Inc., Lebanon, NH USA, 1993.
Anonim, "Pre-BFC User's Guide" , Version 4.2, June 1993, Fluent Inc., Lebanon, NH USA.
Anonim, "Fluent Tutorial Guide" , Version 4.2, June 1993, Fluent Inc., Lebanon, NH USA.
Anonim, "Safety Analysis Report" , General Atomic, San Diego, 1996.
Reinaldy N, dkk, "Kaji Teoritik Aspek Termohidrolik Reaktor Riset Pada Daya 2 MW" , Jurnal Teknik Mesin - ITB, Vol. XIII, No. 1, Bandung, Maret 1999.
