PENGEMBANGAN ALGORITMA PEMBANGKITAN G-CODE MESIN PERKAKAS CNC OKUMA&HOWA BERFASILITAS AUTOMATIC TOOL CHANGER DAN INDEXING PADA SOFTWARE CaSTPro
Abstrak
This research deals with the integration product design phase, the process planning phase, and manufacturing operation planning phase through the feature-based product modeling. The competition in manufacturing industries demands a short production lead time. Autonomous Distributed Manufacturing Systems which has autonomic production elements enable to integrate those three phases through its autonomic product model. One of the proposed methodologies is a feature-based product modeling. At feature base product modeling, a product was defined as a model that is an interaction among features. Product model enable to identify the decreasing or additional volume influence to its geometry. At the final stage of product design, a model product enables to identify all features it's has, features interaction, and features manufacturing sequences. At this research, G-Code was generated by product model that was designed by using CaSTPro software. The developed product model enriched its functionality with new facility that was a G-Code generation. As an example, G-Code fit for a horizontal machining center Okuma&Howa MILAC 4H FANUC 6M which was equipped with a tool changer and indexing had been developed.Referensi
Bellicos, D.B., Pengembangan Algoritma Pemrosesan Feature-Feature Berpotongan pada Dua Bidang yang Saling Bertolak Belakang dalam Pemodelan Produk Berbasis Feature, Tugas Akhir, Universitas Katolik Parahyangan, Bandung,1999
Christanto, H., Pengembangan Pemodelan Produk Berbasis Feature Berdasarkan pada Algoritma Pemrosesan Feature-feature yang Saling Berpotongan, Tugas Akhir,. Universitas Katolik Parahyangan, Bandung, 1998
FANUC Ltd., FANUC Series 6 For Machining Center Operator's Manual, 1990
Gunawan, M. dan Edison, P., Pengembangan Algoritma Visualisasi dan Perangkat Lunak untuk Pemodelan Produk Berbasis Feature (Studi Kasus Interaksi Feature Bersinggungan), Tugas Akhir, Universitas Katolik Parahyangan, Bandung, 2000
Hartono, R., Pemodelan Produk Berbasis Feature, Thesis Magister. Institut Teknologi Bandung, Bandung, 1997
Iwandi, G., Fungsi Pemilihan Pahat dan Pengembangan G-Code Beberapa Mesin Alternatif Pada Pengembangan Perangkat Lunak CaSTPro, Skripsi, Universitas Katolik Parahyangan, Bandung, 2002
Kurniawan, S.E. dan Yuanita, H., Pengembangan Perangkat Lunak CaSTPro Untuk Pemilihan Pahat dan Pembangkitan G-Code, Skripsi, Universitas Katolik Parahyangan, Bandung, 2001
MAHO Aktiengesellschaft, MAHO CNC 432 Version 600/700 Programming Instruction
Mantripragada, R., Development of Computer Aided Engineering System for Feature Based Design of Box-Type Sheet Metal Parts, Thesis MSc., Chapter 3, the Ohio State University, Ohio, 1994
Mantyla, M., Nau, D., and Shah, J., Challenges in Feature Based Manufacturing Research, Communications of the ACM, Vol. 39, No. 2, p.77-86, 1996
Martawirya, Y.Y., Sistem Produksi Terdistribusi Mandiri. Lab. Teknik Produksi. Institut Teknologi Bandung, Bandung, 1998
Martawirya, Y.Y., Teknik Pemodelan Berorintasi Obyek. Lab. Teknik Produksi. Institut Teknologi Bandung, 1998
Sitorus, H.M.R., Pengembangan Algoritma Pemrosesan Feature-Feature Bersinggungan pada Dua bidang Yang Saling Bertolak Belakang dalam Pemodelan Produk Berbasis Feature, Tugas Akhir, Universitas Katolik Parahyangan, Bandung, 1999
Natalina, M., Perancangan Algoritma untuk Penentuan Urutan Pelaksanaan Set-Up yang Minimal dalam Pemodelan produk Berbasis Feature, Tugas Akhir, Universitas Katolik Parahyangan, Bandung, 1999
Ozturk, R., Kaya, N., Alankus, O.B., and Sevinc, S., Machining Feature and Algorithms for Set-up Planning and Fixture Design. Computer Integrated Manufacturing System Journal, Vol.9, no.4, p.207-216, 1996
Rochim, T., Pemrograman NC, Institut Teknologi Bandung
Solihin, I. dan Sandrawan, F., Pengembangan CaSTPro untuk Feature Berbentuk Primitif Silinder, Tugas Akhir, Universitas Katolik Parahyangan, Bandung, 2001
Solomon, O., Computer Support in the Design of Mechanical Product Constraint Specification and Satisfaction in Feature Based Design for Manufacturing, Thesis Phd. Chapter 3, University of Twente, Enschede, 1994
Suherdi, R. dan Gunawan, A., Pengembangan Algoritma Urutan Pengerjaan Feature Berdasarkan Kriteria Jumlah Set-Up dan Panjang Fillet pada Perangkat Lunak Pemodelan Produk Berbasis Feature, Tugas Akhir. Universitas Katolik Parahyangan, Bandung, 2000
Suryadi, V. dan Aryanti, I., Pengembangan Operasi Pembatalan (Undo) dan Pengerjaan Kembali (Redo), Penentuan Bentuk serta Urutan Pengerjaan Feature pada Perangkat Lunak Pemodelan Berbasis Feature, Tugas Akhir, Universitas Katolik Parahyangan, 2000
Van Leeuwen, J.P. and Wager, H., Architecturall Design by Features, Proceedings of the 7th International Conference on Computer Aided Architectural Design Futures, Munich, Germany, August 4-6, 1997, p.97-115, 1997
