Photometric Stereo Method Used for Woven Fabric Density Measurement Based on 3D Surface Structure

Endang  Juliastuti; Irwan Setiawan; Vebi Nadhira; Deddy Kurniadi

doi:10.5614/j.eng.technol.sci.2023.55.6.4

Authors

Endang Juliastuti Instrumentation and Control Research Group, Faculty of Industrial Technology, Institut Teknologi Bandung, Jalan Ganesa No. 10, Bandung 40132, Indonesia
Irwan Setiawan Engineering Physics Doctoral Program, Faculty of Industrial Technology, Institut Teknologi Bandung, Jalan Ganesa No. 10, Bandung 40132, Indonesia
Vebi Nadhira Instrumentation and Control Research Group, Faculty of Industrial Technology, Institut Teknologi Bandung, Jalan Ganesa No. 10, Bandung 40132, Indonesia
Deddy Kurniadi Instrumentation and Control Research Group, Faculty of Industrial Technology, Institut Teknologi Bandung, Jalan Ganesa No. 10, Bandung 40132, Indonesia

DOI:

https://doi.org/10.5614/j.eng.technol.sci.2023.55.6.4

Keywords:

density measurement, Hough transform, photometric stereo, warp density, weft density, woven fabric

Abstract

The measurement of the density of woven fabrics based on the vision method has been widely developed. This study used a photometric stereo method to measure the warp and weft density of woven fabrics based on the 3D surface structure. Six 2D images of the fabric were recorded, each with a different lighting direction. The six images were then reconstructed using the unbiased photometric stereo algorithm to produce the three-dimensional surface structure. The reconstructed image was used to detect and correct the skew angle with the Hough transform. For each image, a depth profile was made toward the x-axis to get the weft curve and towards the y-axis to get the warped curve. The two depth curves were filtered using a locally weighted smoothing (LOESS) filter. This study successfully measured the density of woven fabric with an average error for warp and weft of 0.64% and 0.45%, respectively.

Downloads

Download data is not yet available.

References

Se, I., Characterization of Twist of Fancy Yarns Using Wavelet Analysis of Sensor Signal, Text. Res. J., 90, 2592-2612, 2020.

Laziz, A.A., Mazlan, N., Zuhri, M. & Yusoff, M., Investigation of Alkaline Surface Treatment Effected on Flax Fibre Woven Fabric with Biodegradable Polymer Based on Mechanical Properties, Journal of Engineering and Technological Sciences, 52, pp.677-690, 2020.

Meng, S., Pan, R., Gao, W., Zhou, J., Wang, J. & He, W., Woven Fabric Density Measurement by Using Multi-Scale Convolutional Neural Networks. IEEE Access, 7, pp.75810-75821, 2019.

Xiang, Z., Chen, K., Qian, M. & Hu, X., Yarn-dyed Woven Fabric Density Measurement Method and System based on Multi-directional Illumination Image Fusion Enhancement Technology, J. Text. Inst. 111, pp.1489-1501, 2019.

Pan, R., Gao, W., Li, Z., Gou, J., Zhang, J. & Zhu, D., Measuring Thread Densities of Woven Fabric Using the Fourier Transform, Fibres Text. East. Eur., 23, pp. 35-40, 2015.

Zhang, G. & Xin, B., An Overview of the Application of Image Processing Technology for Yarn Hairiness Evaluation, Res. J. Text. Appar., 20, pp.24-36, 2016.

Tun, M., Linka, A. & Volf, P., Automatic Assessing and Monitoring of Weaving Density. Fibers Polym. 10, pp.830-836, 2009.

Jeong, Y. J. & Jang, J., Applying Image Analysis to Automatic Inspection of Fabric Density for Woven Fabrics, Fibers and Polymers, 6, pp.156-161, 2005.

Jing, J., Liu, S., Li, P., Li, Q., Liu, S. & Jiang, M., Automatic Density Detection of Woven Fabrics via Wavelet Transform, J. Inf. Comput. Sci., 11, pp.2559-2568, 2014.

Qin, Y. & Xu, F., Analysis and Research of the Fabric Density Based on the Wavelet Transform, in Proc. 5th Int. Symp. Comput. Intell. Design, pp.197-200, 2012.

Lin, J.J., Applying a Co-occurrence Matrix to Automatic Inspection of Weaving Density for Woven Fabrics. Text. Res. J., 72, pp. 486-490, 2002.

Wang, X. & Li, X., Recognition of Fabric Density withquadratic Local Extremum. Int. J. Cloth. Sci. Technol. 24, pp. 328-338, 2012.

Pan, R., Gao, W., Liu, J. & Wang, H., Automatic Inspection of Woven Fabric Density of Solid Colour Fabric Density by the Hough Transform, Fibres and Textiles in Eastern Europe, 81, 46-51, 2010.

Pan, R., Gao, W., Liu, J. & Wang, H., Automatic Detection of the Layout of Color Yarns for Yarn-dyed Fabric via a FCM Algorithm, Textile Res. J., 80, pp.12-1231, 2010.

Aldemir, E., demir, H. & Sar?, Z., An ?mproved Gray Line Profile Method to ?nspect the Warp?weft Density of Fabrics, J. Text. Inst., 110, 105-116, 2018.

Pan, R., Zhang, J., Li, Z., Gao, W., Xu, B. & Li, W., Applying Image Analysis for Automatic Density Measurement of High-tightness Woven Fabrics, Fibres and Textiles in Eastern Europe, 24, pp.66-72, 2016.

Yildirim, P., Birant, D. & Alpyildiz, T., Data Mining and Machine Learning in Textile Industry, Wiley Interdiscip. Rev. Data Min. Knowl. Discov. 8, 2018.

Zhou, Z., Wang, C., Zhang, J. & Zhu, Z., Color Difference Classification of Solid Color Printing and Dyeing Products based on Optimization of the Extreme Learning Machine of the Improved Whale Optimization Algorithm, Text. Res. J., 90, pp. 135-155, 2019.

Ouyang, W., Xu, B., Hou, J. & Yuan, X., Fabric Defect Detection Using Activation Layer Embedded Convolutional Neural Network, IEEE Access, 7, pp. 70130-70140, 2019.

Li, J., Wang, W., Deng, N. & Xin, B., A Novel Digital Method for Weave Pattern Recognition based on Photometric Differential Analysis, Meas. J. Int. Meas. Confed,. 152, 107336, 2020.

Wang, J., Shi, K., Wang, L., Pan, R. & Gao, W., A Computer Vision System for Objective Fabric Smoothness Appearance Assessment with an Ensemble Classifier, Text. Res. J., 90, pp. 333-343, 2020.

Wang, Y., Deng, N., Xin, B., Wang, W., Xing, W. & Lu, S., A Novel Three-dimensional Surface Reconstruction Method for the Complex Fabrics based on the MVS, Opt. Laser Technol. 131, 106415, 2020.

Qiu, H., Lu, C., Chen, W. & Li, J., Investigation of Laser Current Influence on Two-dimensional Bar Code Contrast, Adv. Mater. Res., 314-316, pp.197-204, 2011.

Perwass, C. & Wietzke, L., Single Lens 3D-camera with Extended Depth-of-field, Hum. Vis. Electron. Imaging XVII 8291, 829108, 2012.

Woodham, R.J. Photometric Method for Determining Surface Orientation from Multiple Images, Opt. Eng. 19, pp. 139-144, 1980.

Li, L., Shan, T., Xue, L., Wang, J. & Chen, X., Study on Woven Fabric Texture based on Fourier Transform and Gabor transform. Key Eng. Mater, 671, pp. 369-377, 2015.

Eldessouki, M. & Ibrahim, S., Chan-Vese Segmentation Model for Faster and Accurate Evaluation of Yarn Packing Density, Text. Res. J., 86, pp. 167-177, 2016.

Liu, J., Jiang, H., Liu, X. & Chai, Z., Automatic Measurement for Dimensional Changes of Woven Fabrics based on texture. Meas. Sci. Technol., 25, 2014.

Drbohlav, O. & Chantler, M., On Optimal Light Configurations in Photometric Stereo, Proc. IEEE Int. Conf. Comput. Vis., II, pp. 1707-1712, 2005.

Gorpas, D., Kampouris, C. & Malassiotis, S., Miniature Photometric Stereo System for Textile Surface Structure Reconstruction. Videometrics, Range Imaging, Appl. XII; Autom. Vis. Insp., 8791, 879117, 2013.

Queau, Y., Mecca, R. & Durou, J.D., Unbiased Photometric Stereo for Colored Surfaces: A Variational Approach, Proc. IEEE Comput. Soc. Conf. Comput. Vis. Pattern Recognit., 2016-Decem, pp. 4359-4368, 2016.

Zhang, J., Pan, R. & Gao, W., Automatic Inspection of Density in Yarn-dyed Fabrics by Utilizing Fabric Light Transmittance and Fourier Analysis, Appl. Opt., 54, 966, 2015.

Cleveland, W.S., Robust Locally Weighted Regression and Smoothing Scatterplots, J. Am. Stat. Assoc., 74, pp. 829-836, 1979.