Modulateur PWM Numerique Programmable : Application a la Conversion d'energie Maximale du panneau solaire a la batterie

Authors

  • Y. Haroen Laboratory Electrical Energy Conversion, Dept. of Electrical Engineering, ITB, Jl. Ganesa 10 Bandung - Indonesia
  • J. Jalade Laboratoire Dâ??Automatique et Dâ??Analyse Des Systemes LAAS-CNRS; equipe Conditionnement de Puissance, Avenue du Col Roche 31400 Toulouse-France
  • J.C. Marpinard Laboratoire Dâ??Automatique et Dâ??Analyse Des Systemes LAAS-CNRS; equipe Conditionnement de Puissance, Avenue du Col Roche 31400 Toulouse-France

Abstract

Abstract. PWM modulator with feedback analog is often used in a voltage/current control system, but sometimes problems arise in which the modulator could not be used with this method. To overcome this problem a programmed numeric PWM modulator is used. This paper discusses the working procedure and realization from the software and hardware point of yiew by using 8085 microprocessor. One of its application is to control the firing time of power switching transistor in a DC converter (BUCK) where the input BUCK is connected to the solar cell panel and the output side is connected to the battery. With time firing control of the power transistor, the power of the solar cell panel can be transferred to the battery at its maximum.

Sari. Modulator PWM dengan umpan balik analog sering digunakan dalam sistem pengaturan tegangan/arus, tetapi kadang-kadang hal ini menimbulkan masalah, sehingga modulator dengan cara ini tidak dapat dipergunakan lagi. Salah satu cara untuk mengatasinya adalah dengan menggunakan modulator PWM numerik terprogram. Di sini diuraikan cara kerja dan realisasinya ditinjau dari piranti lunak dan piranti keras dengan menggunalan mikroprosessor 8085. Salah satu aplikasinya adalah pengaturan waktu penyalaan transistor daya switching pada suatu konverter arus searah (BUCK). Sisi masukan BUCK dihubungkan ke suatu panel sel surya dan sisi keluaran dihubungkan ke baterai. Dengan pengaturan waktu penyalaan transistor daya, maka daya dari panel sel surya dapat ditransfer semaksimum mungkin ke dalam baterai.

References

J. C. Marpinard, Contribution a Petude des systemes non lineaires a structure lineaires par morceux, 1976, Application a l'etude par un modele de type continu-continu, These de Doctorat d'Etat Toulouse 7 Mai 1976.

Contract CEE No. 468 78,4. ESF, 1979, Conditionnement de puissance dans une centrale photovoltaique a consentration de 1 kW', Publication LAAS No. 79.I.04 Toulouse, Janvier 1979.

Intel 85, 1980, Users manuels.

Haroen, Y., 1983, Conditionnement de puissance d'un systeme autonome gere par microprocesseur. Recherche du point de puissance maximum d'un generateur photovoltaique, These de Docteur Ingineur INPT Toulouse 17 Juin 1983.

Robin-Jouan, Y., 1974, Conversion optimale d'energie. Etude d'un systeme MPPPT, Space craft power conditioning electronic seminaire, Fracasti, ITALIE, 20 Mai 1974.

Prajoux, R. & J. Mazankine, 1976, Simulation mathematique des systemes des conditionnements de puissance, Contrat ESTEC n derajat 2299/74 AK, Rapport final Tome 4. Publication LAAS n derajat 1453, Toulouse 20 juillet 1976.

Landsman, E. E., 1978, Maximum power trackers for photovoltaic arrays IEEE, Power Electronics Specialist Conference 1978.

Downloads

How to Cite

Haroen, Y., Jalade, J., & Marpinard, J. (2019). Modulateur PWM Numerique Programmable : Application a la Conversion d’energie Maximale du panneau solaire a la batterie. Journal of Mathematical and Fundamental Sciences, 19(1), 23-35. Retrieved from https://journals.itb.ac.id/index.php/jmfs/article/view/9515

Issue

Section

Articles