Sifat Mekanis Kayu Salam Pada Kondisi Layan Basah

Authors

  • Dina Tiara Kusumawardhani Politeknik Pertanian Negeri Kupang
  • Rizky Hidayatullah Institut Pertanian Bogor
  • Effendi Tri Bahtiar Institut Pertanian Bogor
  • Origenes Boy Kapitan Politeknik Pertanian Negeri Kupang

DOI:

https://doi.org/10.5614/jts.2024.31.2.7

Keywords:

Mechanical properties, syzygium polyanthum, wet service condition

Abstract

Abstract

The abundance of salam wood on the island of Java is an attraction for its use as a construction material. However, there is not much scientific information regarding the mechanical properties of salam wood. This study aims to identify some of the main mechanical properties of salam wood with destructive tests referring to ASTM D143 including tests for static bending, compression parallel to the grain, compression perpendicular to the grain, and shear, as well as physical properties of wood including density, specific gravity, and moisture content. Salam wood with small test samples free of defects in wet and air dry service conditions referring to SNI 7973:2013. The stress value generated in each test by air dry wood has a greater value than that of wet wood. In general, the wet service factor of the test results is not in accordance with the SNI value, but the static bending test for both MOE and MOR produces values that are close to the values required by SNI. Wet service conditions have a significant effect on the strength value of wood.

References

[ASTM] American Standar Testing and Material. 2002. ASTM D 143. Methods of Small Clear Specimens of Timber Designation. Philadelphia: Annual Book of ASTM Standards.

[BSN] Badan Standarisasi Nasional. 2002. Tata Cara Perencanaan Konstruksi Kayu Indonesia. Jakarta: Badan Standarisasi Nasional.

[BSN] Badan Standarisasi Nasional. 2013. SNI 7973-2013. Spesifikasi desain untuk konstruksi kayu. Jakarta: Badan Standarisasi Nasional, Jakarta.

Boerhendhy, I., Nancy, C., Gunawan, A. 2003. Prospek dan Potensi Pemanfaatan Kayu Karet Sebagai Substitusi Kayu Alam. J. Ilmu & Teknologi Kayu Tropis, 1(1), 36?46. DOI: https://doi.org/https://doi.org/10.51850/jitkt.v1i1.328.g300.

Fauzan, Kurniawan, R., & Sari, S. M. 2009. Studi Pengaruh Kondisi Kadar Air Kayu Kelapa Terhadap Sifat Mekanis. Jurnal Rekayasa Sipil, 5(2), 53?64. DOI: /https://doi.org/10.25077/jrs.5.2.53-64.2009.

Febrianto, F., Pranata, A. Z., Septiana, D., Arinana, Gumilang, A., Hidayat, W., Jae-Hyuk, J., Seung-Hwan, L., won-Joung, H., Nam-Hun, K. 2015. Termite Resistance of The Less Known Tropical Woods Species Grown In West Java, Indonesia. Journal of the Korean Wood Science and Technology, 43(2), 248?257. DOI: https://doi.org/10.5658/WOOD.2015.43.2.248.

Handayani, S. 2009. Metode Perekatan dengan Lem pada Sambungan Pelebaran Kayu. Jurnal Teknik Sipil Dan Perencanaan, 11(1), 11?20.

Haygreen, J., Bowyer JL. 1982. Forest Product and Wood Science an Introduction. Iowa: Iowa State University Press.

Heiner, A. P., Teleman, O. 1997. Interface between Monoclinic Crystalline Cellulose and Water: Breakdown of the Odd/Even Duplicity. Langmuir. 13: 511-518. DOI: http://doi.org/10.1021/la960886d.

Hidayatullah, R. (2019). Faktor Tekuk Kolom Kayu Mahoni dan Pinus Pada Berbagai Angka Kelangsingan, Tesis, Bogor: Departemen Hasil Hutan Fakultas Kehutanan Institut Pertanian Bogor.

Khazraji, A.C., Robet, S. 2013. Self-Assembly and Intermolecular Forces When Cellulose and Water Interact Using Molecular Modelling. J. Nanomater. 2013. DOI: http://dx.doi.org/10.1155/2013/745979.

Koswara, A. 2021. Faktor Layan Basah Kayu Konstruksi Struktural. Skripsi, Bogor: Departemen Hasil Hutan Fakultas Kehutanan Institut Pertanian Bogor.

Lempang, M., Asdar, M., & Rulliaty, S. 2013. Struktur Anatomi, Sifat Fisis, dan Mekanis Kayu Kambelu (Buxus Rolfie Vidal.) dan Kanduruan (Phoebe Cuneata Blume) Asal Hutan Alam Di Sulawesi Barat. Jurnal Penelitian Hasil Hutan, 31(1), 27?35. DOI: https://doi.org/10.20886/jphh.2013.31.1.27-35.

Masdar, A. 2018. Perbandingan Kekuatan Tekan Sejajar Serat Terhadap Kekuatan Tekan Tegak Lurus Pada Kayu Mahoni (Swietenia mahagoni). Jurnal Ilmiah Terlsinas, 1(2), 8?11. Diakses dari https://journal.undiknas.ac.id/index.php/teknik/article/view/425, pada 21 Januari 2023.

Prayitno, T. 1992. Sifat Kimia Kayu Kayu Salam (Syzigium polyantha Wight). Buletin Fakultas Kehutanan, 22(1), 53?66.

Priadi, T., & Novianto, H. 2019. Sifat Fisis dan Mekanis Kayu Dari Hutan Rakyat Dalam Uji Biodeteriorasi di Beberapa Daerah Bagian Barat Pulau Jawa. Jurnal Teknik Sipil, 26(3), 231?238. DOI: https://doi.org/10.5614/jts.2019.26.3.6.

[P3HH] Pusat Penelitian dan Pengembangan Hasil Hutan. 2008. Petunjuk Praktis Sifat-Sifat Dasar: Jenis Kayu Indonesia A Handbook Of Selected Indonesia Wood Species. Jakarta: Indonesian Sawmill and Woodworking Association.

Seng, O. 1990. Berat Jenis dari Kayu-Kayu Indonesia dan Pengertian Beratnya Kayu untuk Keperluan Praktek. Bogor: Pengumuman Lembaga Penelitian Hasil Hutan Bogor.

Shmulsky, R., Jones, P. 2019. Forest Products and Wood Science: An Introduction Seventh Edition. Iowa: A John Wiley and Sons Ltd.

Siska, G., Supraptono, B., Budiarso, E. 2010. Variasi Struktur Anatomi, Fisika Dan Mekanika Kayu Pupu Pelanduk (Neoscortechinia kingii Hook. F. Pax Hoffm.) Famili euphorbiaceae dari Kalimantan Tengah. Jurnal Kehutanan Tropika Humida, 3(2), 118?127.

Sucipto, T. 2009. Struktur, Anatomi, dan Identifikasi Jenis Kayu. Medan: Universitas Sumatera Utara.

Sujudwijono, N. 2013. Struktur dan Konstruksi Bangunan Stasiun KA Kota Lama (Dengan Persandingan Stasiun KA Pasarturi Surabaya). Jurnal RUAS, 11(1), 63?75. DOI: http://dx.doi.org/10.21776/ub.ruas.2013.011.01.7.

Uar, N. I., Tuharea, M., Hentihu, N. 2015. Pengaruh Sifat Fisis Kayu Jabon (Antochepalus cadamba). Jurnal Ilmiah Agribisnis Dan Perikanan, 8(2), 46?52. DOI: https://doi.org/10.29239/j.agrikan.8.2.46-52.

Wagner, L., Bos, C., Bader, T. K., de Borst, K. 2015. Effect of Water on The Mechanical Properties of Wood Cell Walls-Results of A Nanoindentation Study. Bioresources, 10(3), 4011?4025. DOI: https://doi.org/10.15376/biores.10.3.4011-4025.

Wahyudi, F., Wospakrik, Rettob, B. 2017. Pengujian Sifat Mekanika Kayu Lulu (Celtis latifolia Planc.) Pada Dua Kondisi Kadar Air Asal Manokwari Papua Barat. J. Ilmu Teknol. Kayu Tropis, 15(1), 68?74. DOI: https://doi.org/10.51850/jitkt.v15i1.357.g311.

Wijayatrie, I. N. S. 2008. Hubungan Antara Kecepatan Gelombang Ultrasonik Dengan Sifat Fisis dan Mekanis Enam Belas Jenis Kayu. Skripsi, Bogor: Departemen Hasil Hutan Fakultas Kehutanan Institut Pertanian Bogor.

Yoresta, F. S. 2015. Pengujian Sifat Mekanik Kayu Merbau Dari Daerah Bogor Jawa Barat. Jurnal Rekayasa Sipil, 11(2), 21?24. DOI: https://doi.org/10.25077/jrs.11.2.81-84.2015.

Published

2024-08-22

How to Cite

Kusumawardhani, D. T., Hidayatullah, R. ., Bahtiar , E. T. ., & Kapitan, O. B. . (2024). Sifat Mekanis Kayu Salam Pada Kondisi Layan Basah. Jurnal Teknik Sipil, 31(2), 171-178. https://doi.org/10.5614/jts.2024.31.2.7