KAJI EKSPERIMENTAL SAMBUNGAN ADHESIF LAPIS TUNGGAL DAN GANDA AKIBAT PEMBEBANAN TARIK

Penulis

  • I Wayan Suweca
  • Hernansjah Hernansjah
  • Soni Taufani

Abstrak

This paper presents an experimental investigation of the single and double adhesively lap-bonding joint. The adhesive material used is MetalloamĀ® grade III. The study was performed to investigate the influence of curing time on the shear strength of the bonding. The results show that the shear strength of the bonding joint increases with the curing time. The maximum shear strength was achieved after the curing time attaint 96 hours.

Referensi

Houwink, R.; Salomon, G., 1965, Adhesion and Adhesives, Volume I, second completely revised edition, Elsevier publishing company, Amsterdam.

Cagle, Charles V., 1968, Adhesive Bonding Techniques and Applications, McGraw-Hill Book Company, New York.

D 1002-72, 1981, Standard Test Method for Strength Properties of Adhesive in Shear by Tension Loading, Annual Book of ASTM Standards, Part 22, Philadelphia.

D 3528-76, 1981, Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints By Tension Loading, Annual Book of ASTM Standards, Part 22, Philadelphia.

E 8-65T, 1966, Tentative Methods of Tension Testing of Metallic Materials, Annual Book of ASTM Standards, Part 30, Philadelphia.

"f

Diterbitkan

2017-05-15

Cara Mengutip

Suweca, I. W., Hernansjah, H., & Taufani, S. (2017). KAJI EKSPERIMENTAL SAMBUNGAN ADHESIF LAPIS TUNGGAL DAN GANDA AKIBAT PEMBEBANAN TARIK. Mesin, 16(3), 65-70. Diambil dari https://journals.itb.ac.id/index.php/jtms/article/view/4879

Terbitan

Bagian

Articles