FPGA-Based Fuzzy-PID Hybrid Control for Electric Oven Temperature

https://doi.org/10.5614/joki.2026.18.2.13

Authors

  • Yurixa Sakhinatul Putri Department of Electrical Engineering, Politeknik Negeri Jakarta 16425, Depok, Indonesia
  • Ihsan Auditia Akhinov Department of Electrical Engineering, Politeknik Negeri Jakarta 16425, Depok, Indonesia
  • Hariyanto Hariyanto Department of Electrical Engineering, Politeknik Negeri Jakarta 16425, Depok, Indonesia
  • Hana Kamila Adiningtyas Department of Electrical Engineering, Politeknik Negeri Jakarta 16425, Depok, Indonesia
  • Elitaria Bestri Agustina Siregar Department of Electrical Engineering, Politeknik Negeri Jakarta 16425, Depok, Indonesia
  • Muhammad Alief Putra Department of Electrical Engineering, Politeknik Negeri Jakarta 16425, Depok, Indonesia
  • Muhammad Farrel Abdoel Jabbar Department of Electrical Engineering, Politeknik Negeri Jakarta 16425, Depok, Indonesia

Keywords:

Fuzzy-PID, FPGA Cyclone IV, electric oven, Ziegler-Nichols, auto-tuning

Abstract

Resistive electric ovens exhibit high thermal inertia and nonlinear dynamics, making fixed-parameter PID controllers prone to overshoot and slow responses under varying setpoints. This study proposes and implements a Hybrid Fuzzy-PID controller on a Cyclone IV FPGA using a zero-order Takagi-Sugeno fuzzy inference system as a real-time auto-tuner for the Kp and Ki parameters. The controller is evaluated against a conventional PID controller tuned using the Ziegler-Nichols method. The fuzzy inference system uses error and delta error as inputs to adapt the controller parameters according to changes in the thermal response of the oven. All control algorithms are implemented in VHDL on a Cyclone IV FPGA without floating-point operations. Experimental results demonstrate that the proposed Hybrid Fuzzy-PID controller provides improved thermal response compared with the conventional PID controller, achieving faster settling behavior, controlled overshoot, and lower average power consumption under the tested conditions. The FPGA-based implementation also provides more accurate and deterministic actuation than the microcontroller-based implementation. These findings demonstrate that the proposed FPGA-based Hybrid Fuzzy-PID controller can improve real-time temperature regulation and power utilization in resistive electric ovens.

References

K. J. Åström and T. Hägglund, “Revisiting the Ziegler-Nichols step response method for PID control,” J. Process Control, vol. 14, no. 6, pp. 635–650, 2004. https://doi.org/10.1016/j.jprocont.2004.01.002

L. Liu, D. Xue, and S. Zhang, “General type industrial temperature system control based on fuzzy fractional-order PID controller,” Complex & Intelligent Systems, vol. 9, pp. 2585–2597, 2023. https://doi.org/10.1007/s40747-021-00431-9

W. Jiang and X. Jiang, “Design of an intelligent temperature control system based on the fuzzy self-tuning PID,” Procedia Eng., vol. 43, pp. 307–311, 2012. https://doi.org/10.1016/j.proeng.2012.08.053

H. Huang, Y. Luo, C. Zhao, and H. Suo, “Temperature control method for electric heating furnaces based on auto-encoder and fuzzy PI control,” Sensors, vol. 25, no. 16, p. 5020, 2025. https://doi.org/10.3390/s25165020

J. Meng, H. Gao, M. Ruan, H. Guo, X. Zhou, and D. Zhang, “Design of vacuum annealing furnace temperature control system based on GA-Fuzzy-PID algorithm,” PLOS ONE, vol. 18, no. 11, p. e0293823, 2023. https://doi.org/10.1371/journal.pone.0293823

R. Abdrakhmanov, K. Berkimbayev, A. Seitmuratov, A. Ibashova, A. Aliyeva, and G. Nurmukhanbetova, “Intelligent Fuzzy-PID temperature control system for ensuring comfortable microclimate in an intelligent building,” Int. J. Adv. Comput. Sci. Appl., vol. 15, no. 3, pp. 299–307, 2024. https://doi.org/10.14569/IJACSA.2024.0150331

J. Huang, F. Huang, J. Liang, J. Chen, and P. Li, “Fuzzy adaptive PID algorithm in temperature control system of lead patenting furnace,” Adv. Civ. Eng., vol. 2024, 2024. https://doi.org/10.1155/2024/4519537

Y. Wang, “Research on variable universe fuzzy PID control strategy of pipe lining induction heating system,” Modelling and Simulation in Engineering, 2020, p. 8852943. https://doi.org/10.1155/2020/8852943

M. Fang, X. Wan, and J. Zou, “Temperature control for a proton exchange membrane fuel cell system using feed-forward fuzzy PID controller,” in Proc. 3rd International Conference on Green Energy, Environment and Sustainable Development (GEESD 2022), 2022. https://doi.org/10.3233/ATDE220315

Y. J. Chen, “Design of temperature control system based on FPGA and fuzzy-PID control algorithm,” Appl. Mech. Mater., vol. 599–601, pp. 1124–1127, 2014. https://doi.org/10.4028/www.scientific.net/AMM.599-601.1124

R. B. Ali, M. A. Jaballah, E. Aridhi, and A. Mami, “Design and FPGA-implementation of a PID controller for temperature control in a refrigeration system,” Indian J. Sci. Technol., vol. 11, no. 16, 2018. https://doi.org/10.17485/ijst/2018/v11i16/121762

X. Zhang, G. Qin, M. Zhang, and Y. Ma, “Design of fuzzy adaptive PID temperature controller based on FPGA,” TELKOMNIKA Indones. J. Electr. Eng., vol. 11, no. 10, pp. 6008–6016, 2013. https://doi.org/10.11591/telkomnika.v11i10.3459

E. Monmasson and M. N. Cirstea, “FPGA design methodology for industrial control systems - A review,” IEEE Trans. Ind. Electron., vol. 54, no. 4, pp. 1824–1842, 2007. https://doi.org/10.1109/TIE.2007.898281

H. Xie, Y. Yan, and T. Zeng, “Simulations of fuzzy PID temperature control system for plant factory,” in Proc. 2021 International Conference on Wireless Communications, Networking and Applications, Lecture Notes in Electrical Engineering, pp. 1089–1099, 2022. https://doi.org/10.1007/978-981-19-2456-9_109

T. Takagi and M. Sugeno, “Fuzzy identification of systems and its applications to modeling and control,” IEEE Trans. Syst. Man. Cybern., vol. 15, no. 1, pp. 116–132, 1985. https://doi.org/10.1109/TSMC.1985.6313399

R. W. Syufrijal, M. Rif’an, and R. Anugerah, “IoT based smart energy meter using Modbus protocol as electricity saving effort,” in Proceedings of the Conference on Broad Exposure to Science and Technology 2021 (BEST 2021, pp. 184–188, 2022. https://doi.org/10.2991/aer.k.220131.031

A. A. Sneineh and A. A. A. Shabaneh, “Design of a smart hydroponics monitoring system using an ESP32 microcontroller and the Internet of Things,” MethodsX, vol. 11, p. 102401, 2023. https://doi.org/10.1016/j.mex.2023.102401

M. Huba, S. Chamraz, P. Bistak, and D. Vrancic, “Making the PI and PID controller tuning inspired by Ziegler and Nichols precise and reliable,” Sensors, vol. 21, no. 18, p. 6157, 2021. https://doi.org/10.3390/s21186157

Y. Mewada, S. Prajapati, and R. Hakani, “System for PID control and autotuning PID using Ziegler-Nichols method,” Influ. Int. J. Sci. Rev., vol. 4, no. 1, pp. 249–253, 2022. https://doi.org/10.54783/influencejournal.v4i1.23

F. Haugen and B. Lie, “Relaxed Ziegler-Nichols closed loop tuning of PI controllers,” Model. Identif. Control, vol. 34, no. 2, pp. 83–97, 2013. https://doi.org/10.4173/mic.2013.2.4

M. Sugeno and G. T. Kang, “Structure identification of fuzzy model,” Fuzzy Sets Syst., vol. 28, no. 1, pp. 15–33, 1988. https://doi.org/10.1016/0165-0114(88)90113-3

H. Ying, “General SISO Takagi-Sugeno fuzzy systems with linear rule consequent are universal approximators,” IEEE Trans. Fuzzy Syst., vol. 6, no. 4, 1998. https://doi.org/10.1109/91.728456.

J. L. Castro, “Fuzzy logic controllers are universal approximators,” IEEE Trans. Syst. Man. Cybern., vol. 25, no. 4, pp. 629–635, 1995. https://doi.org/10.1109/21.370193

J. P. Cao, S. K. Jeong, and Y. M. Jung, “Fuzzy logic controller design with unevenly-distributed membership function for high performance chamber cooling system,” J. Cent. South Univ., vol. 21, pp. 2684–2692, 2014. https://doi.org/ 10.1007/s11771-014-2230-y

S. Hanumanthakari, “Comparative analysis of different types of membership functions for fuzzy logic controller in direct torque control of induction motor,” in Intelligent and Cloud Computing : Proceeding of the First International Conference on Intelligent Computing in Control and Communication (ICCC 2020), Springer, 2021. https://doi.org/10.1007/978-981-15-8439-8_33

A. Shitsukane, C. Otieno, J. O. Imende, and L. Mukhongo, “Comparative analysis of membership functions in fuzzy logic controllers for robot path planning optimization,” Int. J. Math. Sci. Comput., vol. 11, no. 3, pp. 47–57, 2025. https://doi.org/10.5815/ijmsc.2025.03.04

A. D. Benhamadouche, A. Ballouti, F. Djahli, and A. Sahli, “FPGA based hardware-in-the-loop simulation for digital control of power converters using VHDL-AMS,” Int. J. Adv. Comput. Sci. Appl., vol. 9, no. 12, 2018,. https://doi.org/10.14569/IJACSA.2018.091273

E. A. Ramadan, M. El-bardini, and M. A. Fkirin, “Design and FPGA-implementation of an improved adaptive fuzzy logic controller for DC motor speed control,” Ain Shams Eng. J., vol. 5, no. 3, pp. 803–816, 2014. https://doi.org/10.1016/j.asej.2014.04.002

.M. Y. Hassan and S. F. Abulhail, “FPGA based P/PI/PD/PID-like interval type-2 FLC design for control systems,” Kufa J. Eng., vol. 9, no. 3, pp. 165–179, 2018. https://doi.org/10.30572/2018/kje/090312

. Z. Zhang and Q. Nan, “Adaptive network-based fuzzy inference system-proportional-integral-derivative controller based on FPGA and its application in radiofrequency ablation temperature control,” Appl. Sci., vol. 14, no. 11, p. 4510, 2024. https://doi.org/10.3390/app14114510

Published

2026-10-21

How to Cite

[1]
Y. S. . Putri, “FPGA-Based Fuzzy-PID Hybrid Control for Electric Oven Temperature”, JOKI, vol. 18, no. 2, pp. 348-361, Oct. 2026.

Most read articles by the same author(s)