Design and Construction of Alginate Mixer Control System Based on Arduino and Nextion Display

https://doi.org/10.5614/joki.2026.18.1.9

Authors

  • Riky Hendra Lesmana Electrical Engineering,Faculty of Science and Technology, Universitas Muhammadiyah Sidoarjo, Kabupaten Sidoarjo, 61215, Indonesia
  • Izza Anshory Electrical Engineering,Faculty of Science and Technology, Universitas Muhammadiyah Sidoarjo, Kabupaten Sidoarjo, 61215, Indonesia
  • Indah Sulistiyowati Electrical Engineering,Faculty of Science and Technology, Universitas Muhammadiyah Sidoarjo, Kabupaten Sidoarjo, 61215, Indonesia
  • Jamaaluddin Jamaaluddin Electrical Engineering,Faculty of Science and Technology, Universitas Muhammadiyah Sidoarjo, Kabupaten Sidoarjo, 61215, Indonesia

Keywords:

arduino mega 2560, nextion display, control system, alginate mixer, inverter, viscosity

Abstract

This study aims to design and implement an Arduino-based alginate mixer control system with Nextion Display as the user interface. This system was developed to improve the accuracy of mixing time and maintain the consistency of mixing results in the production process. The method used is a design with an experimental approach through testing several variations of stirring time and comparison with a conventional manual timer-based system. The parameters observed include time error and viscosity values of the mixing results. The test results show that the Arduino-based system has better time accuracy with smaller and more stable error values. This has an impact on more consistent viscosity results, which values obtained are in the range of 100110 dPa·s according to process standards. In addition, the developed system also provides ease of operation and monitoring through real-time displays on the Nextion Display. Thus, this system can be a more effective alternative compared to conventional systems in the alginate mixing process.

References

I. Adin, C. Wiradendi, E. Dewi “Analisis kesiapan otomasi produksi pada PT X,” Jurnal Ilmiah Ekonomi dan Manajemen, vol.3, no.6 , pp. 528-535, Juni 2025. [Online]. Available: https://ejurnal.kampusakademik.co.id/5563

R. Pramudita, M. Adzi, P. Rammadhan, M. R. Ashari, and R. A. Nafisa, “Analisis dampak otomasi industri terhadap efisiensi operasional dan optimasi konsumsi energi,” Jurnal Ilmiah Teknologi Informasi Terapan, vol. 11, no. 1, pp. 1–8, 2024. https://doi.org/10.33197/jitter.vol11.iss1.2024

I. K. Anaam, T. Hidayat, R. Y. Pranata, H. Abdillah, A. Yhuto, and W. Putra, “Vocational Education National Seminar ( VENS ) : Pengaruh trend otomasi dalam dunia manufaktur dan industri,” dalam Prosiding Vocational Education National Seminar (VENS), vol. 1, no. 1, pp. 46–50, 2022. [Online]. Available: https://jurnal.untirta.ac.id/index.php/VENS/article/view/15784

S. Subaryono, T. Tazwir, A. Husni, U. Ustadi, dan Y. Pranoto, “Aplikasi campuran alginat dari sargassum crassifolium dan gum sebagai pengental textile printing,” Jurnal Pascapanen dan Bioteknologi Kelautan dan Perikan., vol. 10, no. 2, pp. 155, 2016. https://doi.org/10.15578/jpbkp.v10i2.275

G. H. Rajagukguk dan A. Widiantono, “Perancangan dan implementasi sistem monitoring mesin produksi berbasis lampu IoT dan web dashboard di PT Motor Jaya Indonesia,” Jurnal Minfo Polgan, vol. 14, no. 2, Oktober 2025. https://doi.org/10.33395/jmp.v14i2.15413

Parmin Lumbantoruan, “Pengaruh suhu terhadap viskositas minyak pelumas (oli),” Sainmatika: Jurnal Ilmiah Matematika dan Ilmu Pengetahuan Alam, vol. 13, no. 2, pp. 26–34, 2016. [Online]. Available: https://jurnal.univpgri-palembang.ac.id/article/view/993

Teuku Marjuni, Beny Hartawan, R. Agung Efriyo, Tumpal Ojahan R., Anang Ansyori, dan Adi Prastyo, “Penerapan sistem otomasi serta sosialisasi teknologi otomasi berbasis Arduino,” Jurnal Pengabdian Masyarakat Prodi Akuntansi, vol. 5, no. 1, pp. 369–375, Juni 2025. [Online]. Available: https://ejurnalmalahayati.ac.id/viewFile/21727/12680

A. R. Kedoh, Nursalim, H. Djahi, Don E.D.G Pollo, “Sistem kontrol rumah berbasis Internet Of Things (IOT) menggunakan Arduino Uno,” Jurnal Media Elektro, vol. 8, no. 1, April 2019. https://doi.org/10.35508/jme.v8i1.1403

Fajar Gumilang, Lenni, Akhmad Kurniawan, “Prototype sistem kontrol arm robot pemindah barang berdasarkan warna menggunakan mikrokontroler Arduino Uno,” Jurnal Teknik Elektro, vol. 7, no. 1, pp. 8-17, 2023. http://dx.doi.org/10.31000/jte.v7i1.9786

A. Faroqi, M. S. Ws, M. Si, D. Ph, and R. Nugraha, “Perancangan sistem kontrol otomatis lampu menggunakan metode pengenalan suara berbasis Arduino,” TELKA: Jurnal Telekomunikasi, Elektronika, Komputasi, dan Kontrol, vol.2, no.2, pp. 106-117, November 2016, https://doi.org/10.15575/telka.v2n2.106-117

A. Trisna et al., “Sistem kontrol tegangan pada generator induksi 3 phasa dengan PLC voltage,” Elektriese: Jurnal Sains dan Teknologi Elektro, vol. 13, no. 01, April 2023. https://doi.org/10.47709/elektriese.v13i01.2347

R. Listiana dan H. Widhianty, “Sistem kontrol dan monitoring water treatment plant menggunakan antarmuka Nextion dan platform IoT Blynk,” Journal Informatics And Electronics Engineering, vol. 04, no. 02, pp. 55–63, 2024. https://doi.org/10.70428/jiee.v4i2.1022

H. Haryanto dan S. Hidayat, “Perancangan HMI (Human Machine Interface) untuk pengendalian kecepatan motor DC,” Setrum: Jurnal Sistem Kendali-Tenaga-Elektronika-Telekomunikasi-Komputer, vol. 1, no. 2, 2012. https://dx.doi.org/10.36055/setrum.v1i2.476

D. Iswahyudi dan I. Anshory, “Rancang bangun alat pengontrol kelembaban udara pada budidaya jamur menggunakan Arduino Uno dan Ultrasonic Mist Maker,” J-Eltrik, vol. 1, no. 2, 2019. http://dx.doi.org/10.30649/j-eltrik.v2i1.46

I Sulistiyowati, “Cigarette detection system in closed rooms based on Internet of Thing ( IoT )”, Journal of Physics: Conference Series, vol. 1402, no.4, p. 044005, 2019, https://doi.org/10.1088/1742-6596/1402/4/044005

Published

2026-04-23

How to Cite

[1]
R. H. Lesmana, I. Anshory, I. Sulistiyowati, and J. Jamaaluddin, “Design and Construction of Alginate Mixer Control System Based on Arduino and Nextion Display”, JOKI, vol. 18, no. 1, pp. 106-116, Apr. 2026.