Electric Traction Motor Drive Modeling For Electric Karting Application Using Matlab®/Simulink® Software
Abstract
An electric traction motor drive for an electric karting application was modeled for efficiency studies and simulated using the MATLAB®/Simulink® software. The model includes models of a battery, power electronic converter, electric motor, and vehicles dynamic of go-karts to a typical 48 seconds track driving schedule. The losses of each component of the electric traction motor drive were modeled and simulated over the entire speed range. In the battery was also calculated the state of charge (SOC) of the battery over the driving cycle. The regenerative braking energy captured was also considered in the simulation. Finally, the overall electric traction motor drive system efficiency and energy consumed were estimated based on the individual model based efficiency and energy consumed analysis. Index Terms—Battery, electric go-kart, efficiency maps, loss modeling, and regenerative braking.Published
2011-01-04
How to Cite
[1]
D. Istardi, “Electric Traction Motor Drive Modeling For Electric Karting Application Using Matlab®/Simulink® Software”, JOKI, vol. 1, no. 2, p. 65, Jan. 2011.
Issue
Section
Articles
Copyright & Licensing
An author who publishes in the Jurnal Otomasi Kontrol dan Instrumentasi agrees to the following terms:
- The author retains the copyright and grants the journal the right of first publication of the work simultaneously licensed under the Creative Commons Attribution-ShareAlike 4.0 License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal
- Author can enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book) with the acknowledgement of its initial publication in this journal.